Viper SRT-10 V10-8.4L (2008)
10. Using a trim stick C-4755 or equivalent, disengage the two vertical spring clips attaching top flange of the trim panel to door inner panel by prying
trim panel upward to release spring clips.
11. Using a small flat bladed tool or equivalent, separate the cable housing grommet and disconnect the inside handle release cable.
Front Door Trim Panel - Installation
INSTALLATION
1. Connect the inside handle assembly release cable (1).
2. Connect the electrical connectors.
3. Install the trim panel by engaging the two vertical spring clips on the top flange into the slots in the door inner panel and push trim panel
downward to lock spring clips into position.
4. Install the screw (3) at the front of the trim panel.
5. Install the two screws hidden by the pull handle cover (5).
6. Install the pull handle cover and install the screw (4).
7. Install the interior release handle screw and install the trim plug.
8. Install the three trim panel screws in the speaker opening.
9. Install the speaker.
