Viper SRT-10 V10-8.4L (2008)
Seat Cushion: Service and Repair
Seat Cushion Cover - Installation
INSTALLATION
1. Install the cover onto the seat cushion foam (2) and install new hog rings.
2. Place the cushion/cover onto the cushion frame and connect the j-straps (4).
3. Position the seat back assembly into place and clip the recliner cable (1) to the frame.
4. Install the seat adjuster. See: Service and Repair/Adjuster-Seat/Installation.
WARNING: Do not connect the battery negative cable. Serious or fatal injury may result if the system test is not performed first. See:
Restraint Systems/Air Bag Systems/Testing and Inspection
5. Place battery access cover into place and install four bolts.
6. Close deck lid.
