Viper SRT-10 V10-8.4L (2008)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lifters - Removal
REMOVAL
1. Remove cylinder head(s) See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Removal.
NOTE: If tappets (3) are to be reused, identify tappet location to ensure installation in original location.
2. Remove tappet aligning yoke bolt (1).
3. Remove tappet aligning yoke (2) and tappets (3).
CAUTION: Do not disassemble tappets.