Viper SRT-10 V10-8.4L (2008)
9. Install the crankshaft oil scraper.
10. Position oil pump pick-up in place. Tighten crankshaft oil scraper and oil pick-up nuts to 28 Nm (248 in. lbs.).
11. Install oil pump pick up tube (2) using new o-rings (1). Tighten bolt to 11 Nm (95 in. lbs.).
12. Install oil pan See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan - Installation.
13. Install cylinder heads See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.