Viper SRT-10 V10-8.4L (2008)
Rocker Arm Assembly: Service and Repair
Removal
REMOVAL
NOTE: Before replacing parts, inspect all related valvetrain components for damage to prevent engine misfire.
1. Remove cylinder head cover(s) See: Valve Cover/Service and Repair/Cylinder Head Cover - Removal.
NOTE: The rocker arms are intake (2) and exhaust (1) specific.
NOTE: When removing rocker arms, do not remove the from the rocker arm.
2. Remove rocker bolt.
3. Remove rocker arm assemblies noting their location for reassembly.
4. Repeat steps 2 and 3 for remaining rocker arms.