Viper SRT-10 V10-8.4L (2008)
Valve Spring: Service and Repair
Valve Springs - Removal
REMOVAL
NOTE: Before replacing parts, inspect all related valvetrain components for damage to prevent engine misfire.
1. With the cylinder head removed, compress valve springs using a valve spring compressor (1).
2. Remove valve retaining locks.
3. Slowly release valve spring compressor.
4. Remove valve spring retainer (1) and valve spring (2).
5. Before removing the valves,remove any burrs from valve stem lock grooves and clean the valve stem to prevent damage to the valve guides.
Identify the valves to ensure installation in original location.
6. Remove valve (5) from cylinder head.
7. Remove valve seal.
8. Repeat procedure for remaining valves.