Viper SRT-10 V10-8.4L (2008)
1. Using disconnect tool 9005, disconnect oil lines (2,3) from engineSee: Procedures.
2. Using disconnect tool 9005, disconnect oil lines (3,5) from the oil cooler (1)See: Procedures.
Oil Cooler
OIL COOLER
1. Position oil cooler (1) in place.
2. Install oil cooler fasteners (2). Tighten to 5 Nm (40 in. lbs.).
3. Connect oil supply (3) and return lines (5) to oil cooler See: Procedures.
