Viper SRT-10 V10-8.4L (2008)
Oil Pan: Service and Repair
Engine Oil Pan - Installation
INSTALLATION
1. Clean gasket surfaces. Inspect oil pan gasket. Replace as necessary.
2. Apply an 1/8 in. bead of Mopar Engine RTV at the front T-joints (1) between the cylinder block to timing chain case cover. and the two joints
between the rear main seal retainer and engine block.
3. Apply an 1/8 in. bead of Mopar Engine RTV at the rear T-joints (1) between the rear main seal retainer and engine block.
4. Position oil pan (1) and gasket (2) to engine block. Hand start all fasteners.