Viper SRT-10 V10-8.4L (2008)
8. Remove air cleaner housing (1)See: Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air Cleaner
Housing - Removal.
9. Remove power steering reservoir and mounting bracket.
10. Remove front suspension cross tie (1).
11. Remove cylinder head coverSee: Engine/Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Removal.
12. Using a block of wood and a suitable jack under the oil pan, raise engine enough to remove exhaust manifold.
13. Remove exhaust manifold (4) and gasket (1).
Right