Viper SRT-10 V10-8.4L (2008)
13. Remove front suspension cross tie (1).
14. Using an appropriate jack, raise engine and support engine.
15. Remove exhaust manifold (4) and gasket (1).
Left
LEFT EXHAUST MANIFOLD
NOTE: Care must be taken to protect the cylinder head covers powder coating from scrapes and abrasions.
1. Install new gasket (1) and install exhaust manifold (4). Tighten attaching fasteners to 29 Nm (257 in. lbs.).
2. Lower engine and remove jack.
3. Raise vehicle on hoist.