Viper SRT-10 V10-8.4L (2008)
Air Duct: Service and Repair
Floor Ducts - Installation
INSTALLATION
1. Position the floor distribution duct (5) into the vehicle and connect it to the HVAC housing.
2. Install the one screw (3) and one nut (4) that secure the floor distribution duct to the dash panel (1). Tighten the screw and nut to 2 Nm (17 in.
lbs.).
3. Install the instrument panel assembly See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel - Installation.
4. Reconnect the negative battery cable.
