Viper SRT-10 V10-8.4L (2008)
11. Connect the A/C liquid line (7) to the A/C condenser.
12. Install the bolt (6) that secures the A/C liquid to the A/C condenser. Tighten the bolt to 18 Nm (13 ft. lbs.).
13. Install the air intake ducts to the front of the air cleaner assembly .
14. Reconnect the negative battery cable.
15. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
16. If the A/C condenser is being replaced, add 30 milliliters (1 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple A/C
system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system See: Service
and Repair/Refrigerant Oil Level. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
17. Charge the refrigerant system See: Service and Repair/Refrigerant System Charge.
