Viper SRT-10 V10-8.4L (2008)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb - Installation
BULB
CAUTION: Do not touch the glass of halogen lamps with fingers or other possibly oily surface. Reduced lamp life will result.
1. Install the fog lamp bulb ((3) by turning 1/4 turn clockwise.
2. Connect the electrical connector to the fog lamp bulb (3).
3. Install the access panel within wheel well.
4. Verify fog lamp aim. If adjustment is necessary . At 25 feet on level surface, the fog lamp beam should be 11 inches off floor on alignment screen.
