Viper SRT-10 V10-8.4L (2008)
Tail Light Bulb: Service and Repair
Tail Lamp Unit Bulbs - Removal
Coupe
BULB - COUPE
1. Remove the two Torx head retaining screws to the access panel of the respective side of the vehicle and remove panel.
2. Rotate socket (3) counterclockwise one half turn and pull socket from lamp unit (1).
3. Rotate and pull bulb (2) from socket (3).
Roadster
BULB - ROADSTER
It is not necessary to remove the tail lamp unit to change lamps.
1. Open deck lid.
2. Remove the two Torx head retaining screws to the access panel of the respective side of the vehicle and remove panel.
3. Reach in behind the tail lamp unit (1) and turn the respective bulb socket (3) counterclockwise, pull forward and remove.
4. Pull bulb (2) from socket (3).