Viper SRT-10 V10-8.4L (2008)
18. Raise and support the vehicle.
19. Remove the right front wheel See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal.
20. Remove the right inner fender splash shield See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse
Splash Shield - Removal.
21. Remove the bolt (5) that secures the rear section of the A/C suction line (6) to the A/C accumulator (2).
22. Disconnect the A/C suction line from the A/C accumulator and remove and discard the O-ring seal.
23. Install plugs in, or tape over the opened suction line fittings and the accumulator and evaporator ports.
24. Remove the rear section of the A/C suction line from the engine compartment.
