Viper SRT-10 V10-8.4L (2008)
3. Install front extension belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
4. Lower vehicle.
5. Position radiator cooling module (1) and install mounting screws (2). Tighten mounting screws to 11 Nm (95 in. lbs.).
6. Slide return hose (1) onto reservoir fitting. Expand hose clamp and slide it over hose on reservoir fitting. Secure clamp once it is past bead formed
into fluid reservoir fitting.
7. Install air cleaner. See: Filters/Air Cleaner Housing
8. Connect the battery negative (-) cable to battery negative battery terminal.
9. Fill and bleed the power steering system. See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair
10. Check for leaks.
Supply Hose
INSTALLATION
1. Install supply hose (2) on fitting of power steering pump (1). Install hose clamp on return hose past upset bead on pump fitting.
