Viper SRT-10 V10-8.4L (2008)
Fuel Injector: Service and Repair
Fuel Injector - Removal
REMOVAL
WARNING: The fuel system is under a constant pressure (even with the engine off). Before servicing any fuel system hoses, fittings or lines, the
fuel system pressure must be released.
NOTE: If replacing an individual injector, do not remove the fuel rail completely. The fuel rail can be loosened and position in order to service
the injector without fully removing the fuel rail completely from the engine.
1. Remove fuel rail from cylinder heads, See: Fuel Rail/Service and Repair/Fuel Rail - Removal.
2. Remove fuel injector from fuel rail.