Viper SRT-10 V10-8.4L (2008)
6. Remove the electrical connector harness attachment clips (1) from throttle bodies.
7. Disconnect the electrical connectors (2) from the throttle bodies.
8. Use a 3/8 fuel line disconnect tool and disconnect the fuel line quick connector from the fuel rail assembly.
9. Disconnect the electrical connector from each of the fuel injectors.
10. Remove the intake manifold, See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal and Replacement/Intake
Manifold - Removal.
11. Remove the bolts from fuel rail.
12. Pull fuel rail and injectors straight up and out of cylinder heads.
13. Remove the fuel injectors from fuel rail.
