Viper SRT-10 V10-8.4L (2008)
Spark Plug: Service and Repair
Spark Plug - Removal
REMOVAL
NOTE: Always remove the ignition cable by grasping the top of the spark plug insulator, turning the boot 1/2 turn and pulling straight up in a
steady motion.
CAUTION: Prior to removing the spark plugs. Spray compressed air around the spark plug area of the cylinder head for each of the spark
plugs being removed. This will help prevent foreign material from entering combustion chamber.
1. Remove ignition cable boot from the spark plug.
2. Remove spark plug from cylinder head using a quality socket with a rubber or foam insert.