Viper SRT-10 V10-8.4L (2008)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor - Installation
INSTALLATION
1. Install crankshaft position sensor (CKP) (5) and mounting stud (1) to engine block. Tighten stud to 9 Nm (79.5 in. lbs.).
2. Connect electrical connector (4) to CKP (5).
3. Install heat shield (3) and nut (2) to stud (1). Tighten nut to 8 Nm (71 in. lbs.).