Viper SRT-10 V10-8.4L (2008)
Electronic Brake Control Module: Description and Operation
Description
DESCRIPTION
The Controller Antilock Brake (CAB) (4) is a microprocessor-based device which monitors the ABS system during normal braking and controls it when
the vehicle is in an ABS stop. The CAB is mounted to the HCU (hydraulic control unit) (2) as part of the ICU (integrated control unit). The CAB uses a
24-way wiring connector on the vehicle wiring harness. The power source for the CAB is through the ignition switch in the RUN or ON position.