Viper SRT-10 V10-8.4L (2008)
Seat Position Sensor: Description and Operation
Description
DESCRIPTION
The seat track position sensor (2) is a Hall Effect-type sensor. This sensor consists of a Hall Effect Integrated Circuit (IC) chip encased in potting
material within a cavity of the molded plastic sensor housing.
The sensor housing has a mounting slot containing an integral latch feature (1) and slides and latches onto a stamped metal blade-type bracket. A molded
connector receptacle (3) integral to the sensor housing is connected to the vehicle electrical system through a connector and take out of the seat wire
harness beneath the front seat cushion frame.
The seat track position sensor cannot be adjusted or repaired and, if ineffective or damaged, the entire sensor must be replaced.
