Viper SRT-10 V10-8.4L (2008)
Power Door Lock Switch: Service and Repair
Power Lock Switch
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal.
3. Remove mounting fasteners and switch.
Installation
INSTALLATION
1. Install switch and mounting fasteners to door trim panel.
2. Install door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Installation.
3. Connect battery negative cable.