Viper SRT-10 V10-8.4L (2008)
10. Install outer tie rod onto steering knuckle. Install a NEW tie rod nut (3). Tighten nut to 75 Nm (55 ft. lbs.).
11. Install brake rotor, then caliper. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation
12. Install wheel and tire assembly See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten
wheel mounting nuts to 135 Nm (100 ft. lbs.).
13. Lower vehicle.
14. Road test vehicle to ensure proper operation of base brakes and ABS.