Viper SRT-10 V10-8.4L (2008)
Tie Rod End: Service and Repair
Tie Rod End - Removal
OUTER TIE ROD
NOTE: Review all Warnings and Cautions. See: Service Precautions.
1. Raise and support vehicle.See: Maintenance.
2. Remove front wheel and tire assembly. See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal.
3. Loosen inner-to-outer tie rod adjuster jam nut (2).
4. Remove nut (3) from outer tie rod.
CAUTION: When releasing tie rod from knuckle using Puller, Special Tool C-4150A, use care not to pinch and damage tie rod grease seal.
5. Release outer tie rod (1) from knuckle (3) using Puller (2), Special Tool C-4150A.
6. Remove outer tie rod by unthreading it from inner tie rod.