Viper SRT-10 V10-8.4L (2008)
CAUTION: Do not use any type of impact wrench on Special Tool 6969B. Use only hand tools.
3. Hold Screw (4) special Tool 6969-3, stationary while rotating Nut (1), Special Tool 6969-4 clockwise. This action will draw isolator bushing into
control arm (6).
4. Continue to rotate Nut until bushing metal flange squarely contacts control arm. Do not overtighten Screw.
5. Remove tools.
6. Install upper control arm on vehicle. See: Service and Repair/Removal and Replacement/Rear Upper Control Arm - Installation
