Viper SRT-10 V10-8.4L (2008)
Rear Cross-Member: Service and Repair
Installation
INSTALLATION
1. Install the crossmember and install the side bolts.
2. Tighten the side bolts to 61 Nm (45 ft. lbs.) using the sequence shown.
3. Tighten the slide nuts to 61 Nm (45 ft. lbs.).
4. Install and tighten the transmission mount nut (4) to 61 Nm (45 ft. lbs.).
5. Install the belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
