Viper SRT-10 V10-8.4L (2008)
Stabilizer Bushing: Service and Repair
Rear Stabilizer Bar Bushings - Removal
REMOVAL
NOTE: Review all Warnings and Cautions.See: Service Precautions
1. Raise vehicle. See: Maintenance.
2. Remove both rear wheel and tire assemblies. See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal
3. Remove two bolts attaching each stabilizer bar (1) bushing retainer to frame rails.
4. Slide retainers off bushings.
5. Remove each bushing from stabilizer bar by opening slit in bushing and peeling it off bar.