Viper SRT-10 V10-8.4L (2008)
Strut Tower Brace: Service and Repair
Installation
INSTALLATION
1. Position front strut tower to tower brace into mounting position.
NOTE: The use of a rubber mallet may aid alignment of front strut tower to tower brace.
2. Align brace to allow mounting bolt installation. Hand start all mounting bolts.
3. Tighten the two inboard mounting bolts to 41 Nm (30 ft. lbs.).
4. Tighten the two front mounting bolts to 41 Nm (30 ft. lbs.).
5. Install air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair/Air Cleaner Housing - Installation.