Viper SRT-10 V10-8.4L (2008)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Coupe
COUPE
NOTE: Review all Warnings and Cautions. See: Service Precautions.
1. Remove the B-pillar trim on the side of shock service. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar
Trim/B-Pillar Trim
2. Pull back carpet (2) over rear shelf on side of shock service to expose shock service plug (1).
3. Remove service plug (3) from trunk pan (1) on side of shock service.
4. Raise and support vehicle. See: Maintenance
5. Remove wheel and tire assembly. See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal
6. Remove rear wheelhouse splash shield. See: Body and Frame/Fender/Rear Fender/Rear Fender Liner/Service and Repair/Rear Wheelhouse Splash
Shield - Removal
7. Remove nut and bolt mounting shock assembly clevis bracket (1) to isolator bushing (2) on lower control arm (3).