dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Windows and Glass > < Heated Glass Element Switch|Description
Page 1
background image

Heated Glass Element Switch: Description and Operation
Operation

OPERATION

An LED indicator illuminates when the rear window defogger switch is activated. When the switch is activated, the A/C-heater control operates the rear
window defogger (EBL) relay. The EBL relay controls the current flow to the grid lines in the rear window glass.

NOTE: The EBL system turns off automatically after 10 minutes of initial operation. Each following activation cycle of the EBL system will last
5 minutes.

The EBL system will automatically turn off after an initial programmed time interval of about 10 minutes as long as the ignition switch is in RUN. After
the initial time interval has expired, if the rear window defogger switch is pressed to ON again during the same ignition cycle, the EBL system will
automatically turn off after about 5 minutes. The EBL system will also turn off if the ignition switch is turned to any position other than RUN or by
manually pressing the rear window defogger switch a second time.

The rear window defogger switch and indicator cannot be repaired and the A/C-heater control must be replaced if inoperative or damaged See: Heating
and Air Conditioning/Control Assembly/Service and Repair/A/C Heater Control - Removal.

Relays and Modules - Windows and Glass > < Heated Glass Element Switch|Description