Viper SRT-10 V10-8.4L (2008)
Power Window Switch: Testing and Inspection
POWER WINDOW SWITCH
Any diagnosis of the Power Windows system should begin with the use of scan tool and the appropriate Diagnostic Procedures.
Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of
wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.
Remove the switch See: Service and Repair/Removal. Using an ohmmeter, refer to the power window switch resistance test table to determine if
resistance is correct. If the correct results are not obtained, replace the switch.