Viper SRT-10 V10-8.4L (2008)
Front Door Window Glass: Service and Repair
Front Door Glass - Removal
REMOVAL
1. Remove the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal
2. Remove the inner belt weatherstrip.
3. Remove the watershield.
4. Temporarily connect the batter negative cable.
5. Lower the glass (3) almost all the way down and remove the front retainer clip.
6. Raise the glass and remove the two rear screws (1).
7. Disconnect the glass from the regulator (2) and remove from the door.