Viper SRT-10 V10-8.4L (2008)
Front Door Window Glass: Service and Repair
Front Door Glass - Installation
INSTALLATION
1. Position the regulator (2) in the up position.
2. Install the glass (3) through the window opening and align the front mounting plate to the lift plate.
3. Engage the front glass to the regulator lift plate.
4. Install the two rear screws (1) and tighten to 4 Nm (35 in. lbs.).
5. Lower the glass.
6. Disconnect and isolate the battery negative cable.
7. Install the watershield.
8. Install the inner belt weatherstrip.
9. Install the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Installation.