W150 1/2 Ton Pickup 4WD V8-318 5.2L VIN T 2-BBL (1983)
Brake Disc: Service and Repair
Installation
With Full Time 4WD
Fig. 9 Installing seal slinger on outer axle shaft. 44 FBJ Units w/disc brakes. Models w/full time 4WD
Fig. 10 Installing lip seal on outer axle shaft. 44 FBJ Units w/disc brakes. Models w/full time 4WD
Fig. 11 Using pry bar to retain axle shaft. 44 FBJ Units w/disc brakes. Models w/full time 4WD
Assembly & Installation
1. Apply RTV sealer or equivalent to seal surface of axle shaft.
2. Using driver, Tool No. C-4398-1, install seal slinger with lip toward splines onto outer axle shaft.
3. Carefully insert axle shaft into housing so as not to damage differential seal at side gears. After sliding axle shaft completely in, wedge a pry bar
through universal joint to retain shaft.
