W350 1 Ton Pickup 4WD V8-360 5.9L VIN 1 4-bbl (1988)
Brake Drum: Service and Repair
Brake Drum Installation
For additional information see Notes, Warnings, and Hints.
1. Position drum on axle housing.
2. Install bearing and inner nut. Adjust bearing.
3. Install locking washer and outer nut.
4. Bend locking washer to secure.
5. Place new gasket on hub and install axle shaft, cones, lock washers and nuts.
6. Install wheel and tire assembly.
7. Remove jack stands and lower vehicle.
