W350 1 Ton Pickup 4WD V8-360 5.9L VIN 1 4-bbl (1988)
6. Remove housing grommet from floor pan.
INSTALLATION
1. Insert cable and housing through floor pan and install housing grommet.
2. Install retainer clip at upper end of cable housing and engage cable end in slot of lever clevis.
3. Engage cable housing at lower anchor bracket and install clip.
4. Connect cable at adjusting link by installing adjusting nut.
5. Adjust service brakes and parking brake cable.
6. Apply brakes several times and test for free wheel rotation when parking brake is in the "off" position.
