W350 1 Ton Pickup 4WD V8-360 5.9L VIN 1 4-bbl (1988)
FIGURE 5
5.
Coat the bare blade terminal of the engine overlay harness, PN 4362295, liberally with Mopar Multi-Purpose Grease, PN 4318063, and
snap terminal into insulator located on engine side of wiring assembly, PN 4362804, as shown in Figure 5.
NOTE:
DISCONNECT FEMALE INSULATOR FROM MALE INSULATOR PRIOR TO INSERTION OF TERMINAL, AND
BE SURE THAT WIRE OF ENGINE OVERLAY HARNESS MATES WITH SAME COLOR WIRE OF WIRING
ASSEMBLY.
