W350 1 Ton Pickup 4WD V8-360 5.9L VIN 1 4-bbl (1988)
Figure 5
5.
Install the OD piston retainer. Install the six long bolts in the location shown in Figure 5. Tighten the bolts to 100 inch pound (11N-m) torque.
6.
Install the roller/spring assembly in the cam.
7.
Install the low/reverse drum (the overrunning clutch cam is pressed onto the drum).
Figure 6
8.
Rotate the low/reverse drum. Viewed from the front of the transmission the drum rotate freely when turner clockwise and lock when turned
counterclockwise. Figure 6.
POLICY:
Information only.
