W350 1 Ton Pickup 4WD V8-360 5.9L VIN 1 4-bbl (1988)
Axle Housing Special Service Tools
11. Using tool D-330 or equivalent, remove needle bearing from intermediate axle shaft.
12. Remove shift collar from axle housing.
13. Loosen, then remove differential cover attaching screws. Remove cover and drain lubricant.
14. Push inner axle shaft toward center of vehicle and remove C-lock from shaft groove recess.
Removing/Installing Inner Axle Shaft
15. Using tools D-354-4 and D-354-3 or equivalents, remove inner axle shaft bearing.
16. Using tools D-354-4, D-354-1, and puller C-637, remove inner axle shaft bearing and seal from housing bore.
INSTALLATION
Disconnect Axle Housing Assembly
