W350 1 Ton Pickup 4WD V8-360 5.9L VIN W 4-bbl (1983)
4. Remove shoes with lower shoe-to-shoe spring and star wheel as an assembly.
Installation
For additional information see Notes, Warnings, and Hints.
Fig 3 Support Plate And Guide Pads
NOTE: Pivot screw and adjusting nut have left hand threads on left brake assemblies (brakes on left side of the vehicle) and right hand threads on right
hand assemblies (brakes on right side of the vehicle).
1. Lubricate and assemble star wheel assembly. Lubricate guide pads on support plates with MOPAR Multi-Purpose Lubricant Part Number
4318063, or equivalent.
Fig 8 Removing Or Installing Shoe Assembly (Rear)
2. Assemble star wheel, lower shoe-to-shoe spring and primary and secondary shoe and position of support plate.
3. Connect parking brake cable to parking brake lever.
