W 150 Pickup V8-360 5.9L (1984)
![background image](/dodge/w_150_pickup/v8-360_5.9l/Page-265010.png)
FIGURE 3A - BODY WIRING
FIGURE 3B - BODY WIRING
Install red mold of body harness, PN 4362293, onto red stud of gauge/pump unit. Install yellow mold of harness, PN 4362293,
onto black stud of gauge/pump unit (figure 3-a or 3-b).
Install molded blade terminal of harness, PN 4362293, onto blade terminal of 22 gallon gauge unit only.
NOTE:
PREVIOUS GAUGE UNIT GROUND WILL NOT BE USED ON 22 GALLON GAUGE/PUMP UNIT. ON
36 GALLON GAUGE PUMP UNIT, THE GROUND WIRE ON HARNESS PN 4362293 WILL NOT BE
USED.
CAUTION:
INCORRECT WIRING CONNECTIONS WILL CAUSE THE FUEL LEVEL GAUGE UNIT AND/OR
CLUSTER GAUGE TO FAIL AND THE ELECTRIC PUMP TO BE INOPERATIVE.
Set aside the rest of harness, PN 4362293, to assure wiring is not pinched when reinstalling fuel tank.
4.
Reinstall fuel tank to original position.
D.Body Wiring Harness Pn 4362293