W 150 Ramcharger V8-360 5.9L (1991)
Fig. 11 Piston Seal Removal
-
Install shoe after above modification, if necessary, by snapping shoe into place with fingers or with light "C" clamp, protect new lining from
damage or contamination by using old pads over new lining and across caliper fingers.
Fig 8 Caliper Assembly
3. Remove paper from noise suppression gasket and then position inboard shoe in position on adaptor with shoe "flanges" in the adaptor "ways".
4. Slowly slide caliper assembly into position in adaptor and over disc. Align caliper on machined ways of adaptor.
CAUTION: Be careful not to pull the dust boot from its groove as the piston and boot slide over the inboard shoe.
5. Install anti-rattle springs and retaining clips and torque retaining screws to 200 in lb.
