W 250 Pickup L6-359 5.9L DSL (1989)
Front Door Handle: Service and Repair
Interior Door Handle
Remote Control Assembly
REMOTE CONTROL REMOVAL
1. Remove window regulator handle.
2. Remove remote control handle.
3. Remove trim panel, and watershield.
4. Working through access hole remove linkage and mounting plate to remote control.
5. Remove remote control.
INSTALLATION
1. Slide remote control mounting plate through access hole and into door.
2. Connect linkage and install screws to remote control assembly.
3. Install remote control handle and adjust forward to eliminate excess handle travel.
4. Install trim panel, remote and regulator handle.