W 250 Pickup L6-359 5.9L DSL (1989)
Fig 4 Removing And Installing Snap Ring
7. Remove hub cap. Using Tool C-4020, or equivalent, remove snap ring.
8. Remove flange nuts and lockwashers.
9. Remove drive flange and discard gasket.
Fig 5 Removing Or Installing Outer Lockout
10. Straighten tang on lock ring and using Tool DD-12414D or equivalent, remove outer locknut, lock ring, inner locknut and outer bearing.
11. Carefully slide hub and rotor assembly from spindle.
With Full Time 4WD
Fig. 1 Using puller to remove hub & rotor. 44 FBJ Units w/disc brakes. Models w/full time 4WD
