W 250 Pickup L6-359 5.9L DSL (1989)
Fig 11 Attaching Shoe To Caliper Fingers With C-Clamp
-
If free play is evident by vertical shoe movement after installation, remove shoe from caliper and bend flanges to create slight interference fit
to eliminate all vertical free play when shoe is installed.
Fig. 11 Piston Seal Removal
-
Install shoe after above modification, if necessary, by snapping shoe into place with fingers or with light "C" clamp, protect new lining from
damage or contamination by using old pads over new lining and across caliper fingers.
