W 250 Pickup L6-359 5.9L DSL (1989)
Fig 1 Parking Brake Cable Routing (Part 2 Of 2)
CAUTION: The service brakes must be properly adjusted before adjusting parking brake.
1. Release the parking brake pedal and loosen cable adjusting nut to insure cable is slack.
2. Adjust service brakes.
3. Tighten cable adjusting nut until a slight drag is felt while rotating the wheel.
4. Loosen cable adjusting nut until both rear wheels can be rotated freely, then back off cable adjusting nut two full turns.