W 250 Pickup L6-359 5.9L DSL (1989)
Assemble the injector and new copper sealing washer.
NOTE: Use only one copper washer.
Apply a coat of anti-seize compound to the threads of the Injector hold-down nut and between the top of the nut and injector body.
CAUTION: Align the injector's protrusion with the notch in the bore.
Tighten the injector retainer nut.
Torque Value: 60 N-m [44 ft-lbs]
NOTE: After tightening the injector be sure to push the 0-ring into the groove.
