W 250 Pickup L6-359 5.9L DSL (1989)
CAUTION: Rotating the housing as you press downward will assist in properly seating the piston ring.
Install the thrust collar.
CAUTION: Align the balance mark with the balance mark on the shaft. Mark the top surface with a marker pen so alignment can be verified after
installing the thrust bearing.
Lubricate the thrust bearing with engine oil and install it on the housing.
Torque Value: 4.5 N-m [40 in-lbs]
Install the oil baffle.
CAUTION: Check the balance mark alignment.
