W 250 Pickup V8-5.9L VIN Z (1991)
Center Link: Service and Repair
STEERNG LINKAGE 4WD VEHICLES
Use Puller C-4150 to remove a drag link or pit man arm. Failure to use this tool could cause damage to the seals (Fig 4).
REMOVAL
(1) Remuve drag link tie-rod end ball studs from steering arm and pitman arm (fig 4 and 5).
Use care to avoid damaging the seals
(2) Remove the steering arm nuts and washers (fig 6). Tap the steering arm to loosen it from the knuckle. Pry the steering arm upward and remove.